Aquadrop




Aquadrop is a flexible polyethylene pipe with a chop emitter directly welded inside the pipe itself during the extrusion stage.

The new Aquadrop emitter has been engineered with a wider and deeper labyrinth to guarantee an optimum functionality and efficiency even in most critical conditions. The results achieved on long distances and on emission uniformity are excellent and constant through the time. A high quality standard is ensured by electronic check devices during the production stage

Aquadrop is engineered for irrigation in horticulture, floriculture, arboriculture and gardening. Aquadrop is available in different thickness and flow ranges to each irrigation requirement.

Aquadrop is available :
- 17 mm and 22 mm nomimal diameters
- From 0,15 mm (6 mil) to 0,80 mm (32 mil) pipe thickness
- 1,3 lt/h and 2,0 lt/h nominal flow rate
- Distance among emitters from 10 cm
- Packaged in rolls with different length


Recomended dripline length according to output uniformity (mt)
Pressure (bar)E.U. %
1,3 lt/h
2,0 lt/h
152030405060152030405060
1,0D/17 mm8512515620825028631896116153184211239
90991301611992332567293112149172193
D/22 mm85162230303345415469124172224257308351
90136192241291332373100138179216245277
* Data refer to flat grounds



Flow rate-pressure relation
Pressure BarFlow rate lt/h
1,01,32,0
0,91,21,8
0,81,01,6
0,7,091,4


Technical Features
External diameter min 16,4 mm ÷ 22,4 mm
min 17,7 mm ÷ 23,6 mm
Internal diameter 16,1 mm - 22 mm
Thickness0,15 mm
6 mil
0,20 mm
8 mil
0,25 mm
10 mil
0,30 mm
12 mil
0,38 mm
15 mil
0,45 mm
18 mil
0,62 mm
25 mil
0,80 mm
32 mil
Nominal Flow Rate 1,3 lt/h - 2,0 lt/h
 
Work Pressure 0,7 ÷ 1,0 bar
 
Maximum Pressure0,7 bar1,0 bar1,2 bar1,3 bar1,4 bar1,5 bar1,8 bar2,0 bar
Emitter Spacing 10 ÷ 150 cm
 
Coil length D/172500 mt
2300 mt
2300 mt
2000 mt
2000 mt
1500 mt
1200 mt
1000 mt
900 mt
500 mt
Coil length D/22-1500 mt
 
1300 mt
1000 mt
900 mt
800 mt
600 mt
400 mt
Coils on pallets 20 - 28 -32
 
Required filtration 120 - 150 mesh