Drip In® PC

Pressure compensating

Applications

Ideal to irrigate crops in difficult topographical conditions, varying water pressures and in installations requiring long laterals
Features

Drip In® PC (pressure compensating) dripline has a built in flow regulated emitter that provides a constant discharge over a pressure range of 0,5 bar to 4,2 bar. The emitter is installed in the tube during the extrusion process. This prevents damage and loss of dripper and reduces labour and installation costs
Advantages


  • Resistant to clogging
  • The flow rates never exceeds nominal flow rate
  • Drip In® PC is the only dripline featuring dual-opposed exit holes to prevent re-entry of dirty during vacuum phase at the end of each irrigation cycle
  • Drip In® PC emitter body is made from polyethylene resins. The diaphragm is made from silicon. This conbination will withstand acids down to pH2 as well as chemicals, fertilisers and cholorine
  • The emitters performance is not affected by changes in water temperatures
  • Five years' warranty
    		•

    Versatility



  • Drip In® PC is highly versatile
  • Drippers are available with five different flow rates (1,6-2,0-2,4-2,8-3,8 l/h) and can be inserted into two hose sizes;
    • - 16 mm (I.D. 14 mm / O.D. 16,2 mm)
    - 20 mm (I.D. 18 mm / O.D. 20,4 mm)
  • Unlimited spacing options plus group spacing provide greater design flexibility
  • Drip In® PC can be used in permanent installation or row crops where it is laid out and re-rolled easily
  • Standart reel-length
    • - 300 m per O.D. 20 mm
    - 300 m per O.D. 16 mm
  • Drip In® PC may be hung on wire, laid on the surface or buried (SSDI)
    		•

    Performance chart

    øWall ThicknessDripperSpacingReel LengthReel WeightDimension
    (mm)(mm)(l/h)(cm)(m)(Kg)(ø x h)
    D.I. 14/D.E. 16,21,11,62,02,42,83,830405060751004002280 cm x 35 cm
    D.I. 18/D.E. 20,41,21,62,02,42,83,830405060751003002680 cm x 35 cm